Tools | Tool carriers | Levelling board

Quick-System (1) Zinkenwechsel_Arm_lang_orange_110926

Quick-System

Tine quick change system

The tines are simply pushed into the sockets of the tine carrier and secured with a lynch pin. There is no easier and faster way. There are no tine fixing bolts that require retightening. Even converting tine operation from “on-grip” to trailing mode is quick and simple. The tines, which are forged from special hardened steel, are elastic and wear-resistant.

More information + Less information -
Safe-System (1) Steinsicherung_gesamt_d1_171020

Safe-System

Integrated stone protection

The sprung tine fixing system allows the tines to yield when stones are encountered. The tines are firmly clamped in the socket in the centre of the tine carrier. The socket becomes wider towards the outside so that the horizontal part of the tine can twist out of position while remaining sprung. Much of the shock is absorbed when the tip of the tine hits a stone. This tine fixing system ensures the safe operation in stony soils and allows the tines on both the KX and KG to be used in the “on-grip” mode.

More information + Less information -

Incorporation effect

The AMAZONE rotary cultivator tines mix soil and straw evenly through the working depth. Even large amounts of organic residues are properly incorporated.

For the KX and KG rotary cultivators, the best tine is available to suit any demand.

More information + Less information -

HD tines for an even longer life span

With the HD tine, AMAZONE offers a tine which, due to its hard metal coating, features an up to three times longer service life.

By using HD tines, running costs are minimised and, at the same time, valuable operating time for readjustment and tine changing is saved.

More information + Less information -
Entmischungseffekt der Kreiselgrubber (1) Entmischungseffekt der Kreiselgrubber

Demixing effect of the rotary cultivator

The “on-grip” tine position has proved its effectiveness particularly when mulch sowing as it guarantees a thorough mixing of soil and organic residues.

Tines “on grip” break up the soil from underneath. No smeared layers. Coarse soil particles are thrown further than the light ones.

In this way, the fine soil is concentrated in the lower range of the worked zone whereas the coarser soil particles remain on the surface. The seed is thus placed in the area where the fine soil is located. The seed is therefore placed in the area where the fine soil is collected with the coarser clods staying on the surface to protect the soil from capping, drying and wind and water erosion, and provide protection for young plants. This creates the optimum conditions for good seedling emergence.


1. KG rotary cultivator with “on-grip” tines
2. Levelling board
3. KW wedge ring roller

More information + Less information -
Traktorspurlockerer (1) Cataya-3000_d0_kw_3213_d1_190130

Tractor wheel mark eradicators

For operation on compaction-sensitive soils and at a reduced working depth, the optionally available tractor wheel mark eradicators make sense. The position of the wheel mark eradicators can be adjusted horizontally and vertically. The overload safety device ensures a constant trip force. The narrow, diamond and wing shares are available as soil-engaging points.

More information + Less information -
Planierbalken (1) Keilringwalze_KW_d0_kw_P1042449_d1_191009

Levelling board

The levelling board levels the earth flow between the tines and the roller and presses obstacles downwards. With the universal operating tool, the height of the levelling board can be adjusted with ease.


The benefits:

  • Independent height control parallel to the roller Integrated
  • overload safety protection allows for upward evasion
  • Optionally, the levelling board can also be left out
More information + Less information -
Seitenbleche (1) KG3001-super_Fendt_d0_kw_P8150585_d1_161109

Side plates

The newly-developed side plates are sprung loaded. Thanks to their suspension, the side plates can be adjusted via a slotted hole and, when worn, be simply exchanged. The universal setting tool supplied as standard is all that is necessary to make the adjustment.


The benefits:

  • Convenient depth adjustment
  • The spring-loaded guidance makes upward evasion possible
More information + Less information -
Mechanische Tiefenverstellung (1) KE_Detail_001_d1_110926

Mechanical depth adjustment

The parallel guidance of the roller and the levelling board allows the very easy and independent setting of the working depth. By the simple repositioning of the eccentric pin, the working depth can be conveniently matched to the field and operational conditions.

More information + Less information -

KX/KG hydraulic depth adjustment

The optionally available hydraulic depth adjustment for the KX/KG rotary cultivator offers the driver even more comfort and operational possibilities than before, as now, the levelling board is guided in parallel via the roller and so does not require any readjustment when changing the working depth.

If required, for instance when working deeper on the headland, the rotary cultivator can be steplessly adjusted comfortably from the tractor cab. So any change in soil conditions can be directly responded to and the optimum quality of work maintained. 

More information + Less information -

Related links

Here you will find further information on cultivation

Are you interested?

Provide us your contact details* and we will get back to you:
* Your contact details will only be used to contact you as requested.