Nozzles | Drag hoses

Weniger Abdrift (1) – UF 02 UX_0161_CMS

Less drift also at higher wind speeds

With the air-assisted injector nozzles, crop protection agents can be applied with very little drift. They are universally usable in all crops and all classifications. Because of the coarse droplet application, these nozzles can also be used in higher wind speeds.

AMAZONE offers a wide range of nozzles from agrotop, Lechler and TeeJet.

More information + Less information -
Mehrfach-Düsenkörper (1) UX_0126_frei

Single and multi-nozzle bodies

The nozzle bodies with integrated diaphragm non-return anti-drip valves fit up into the boom profiles reliably preventing any dripping at the nozzle. Self-adjusting bayonet fixings ensure a tool-less quick nozzle change. The 3-fold or 4-fold nozzle bodies are suited to frequent nozzle changes due to different applications and crops. Nozzle protection tubes, as standard on the outer sections, or, if desired, over the entire boom working width, ensures protection for long injector nozzles and multiple nozzle bodies.

More information + Less information -

Electric boundary nozzle switching

For environmentally-friendly spray application at the field edge

  1. Additional nozzle switching
    In order to extend the normal working width, an asymmetrical nozzle can also be switched on. This is particularly useful if the distances between tramlines are not precise enough.
  2. End nozzle switching
    If a one metre buffer zone around the edge of the field needs to remain unsprayed due to distance constraints, end nozzle switching can be used.
  3. Boundary nozzle switching
    For precision border spraying between two sensitive crops, the boundary nozzles can be used to make sure the spray pattern is accurately defined.
More information + Less information -

Drag hose equipment

The drag hose equipment for Super-S2 booms consists of an additional spray line unit and a drag hose set.

The drag hose equipment for the Super-L boom consists of a drag hose set and can be combined with an AmaSwitch 4-fold nozzle body or AmaSelect as well as an extension kit for 25 cm nozzle spacing.

Drag hoses offer a risk-free late top dressing with liquid fertiliser and stainless steel weights help keep the position of the drag hoses within the crop.


  1. Drag hoses on the Super-S2 boom
  2. Stainless steel weights on the drag hose
More information + Less information -

Liquid fertilisation

UX trailed sprayers are particularly suited to liquid fertilising: the use of high grade plastic material, a good paintwork and the virtually exclusive use of stainless steel ensures a long life even with liquid fertiliser operation.

More information + Less information -
UX_0134_rdax_170x157.jpg

Multi-hole nozzles

3- or 7-hole nozzles or FD sluice nozzles are also available for the coarse droplet application of liquid fertiliser on request.

More information + Less information -
Unterblattspritzung (1) UX_0166

Under-leaf spraying

Elegant solutions for successful under-leaf spraying are also possible in combination with AMAZONE crop protection sprayers. For example, the Dropleg system from Lechler is a light and robust under-leaf spraying system for the Super-S2 boom which hangs freely between the rows.

More information + Less information -
Die richtige Düsenwahl (1) UX_0160

The right nozzle choice

Injector nozzles (ID, TTI) have a relatively coarse droplet spectrum and are particularly versatile with regard to their field of application. A pressure range of 2 to 8 bar is possible.

If coverage quality is at the foreground of the application, the use of standard or anti-drift fine droplet nozzles, such as XR or AD, is recommended. Special care is required here due to their tendency to drift above 3 bar.

A good compromise is provided by the modern ID-K or Airmix compact injector nozzles: These have relatively little drift, but do not have too coarse a droplet spectrum and are operated at 2 to 4 bar.

When it comes to special coverage qualities, the double flat fan nozzle is an interesting alternative: the AVI Twin from Agrotop also produces droplets that are not too fine.

The split spray pattern ensures a more even deposit on the front and back of the plant and makes sense maybe, for example, in ear treatment.

For speeds greater than 10 km/h, the TD HiSpeed nozzle with its asymmetrical spraying angle is becoming a new industry trend.


Die richtige Düsenwahl (2) Duesenkoerper
Examples: 1. Lechler IDN 120-025, 2. TeeJet XRC 110-025, 3. Air-injection nozzle AirMix 110-04
Die richtige Düsenwahl (3) Duesenmontageschluessel_d2_170119
Everyone purchasing an AMAZONE crop protection sprayer receives, free of charge, an AMAZONE nozzle mounting tool that enables a much easier nozzle change.








More information + Less information -

The plant protection sector will have to change in the future

The plant protection sector will have to change in the future. Plant protection is an important part of agriculture in securing high yields and optimum quality. Due to the increasing world population, both factors play an enormous role in securing food supply.