Border spreading systems | Border spreading

Grenzstreusysteme

Border spreading systems

Effective and precise – spread only where the fertiliser will benefit plants





Illu_Grenz-_Graben-_Rand-_Beetstreuen_001_d0_20150831_rdax_170x90.jpg
  1. Working width 2) Half working width
Side spreading (yield-oriented) with Limiter V or V+
The adjacent field is an area which is used agriculturally. In this case it is tolerable for a small quantity of fertiliser to be thrown over the field border. The full target rate is applied right up to the field boundary.



Illu_Grenz-_Graben-_Rand-_Beetstreuen_001_d0_201508311_rdax_170x90.jpg
  1. Working width 2) Half working width

Border spreading (environmentally oriented) with Limiter V or V+
If the field is next to a road or a cycle path, no fertiliser may be thrown beyond the field boundary. In this case, the throwing distance is adjusted in combination with the shutter slide.



Illu_Grenz-_Graben-_Rand-_Beetstreuen_001_d0_201508312_rdax_170x90.jpg
  1. Working width 2) Half working width

Water course spreading (environmentally oriented) with Limiter V or V+
If there is a body of water directly at the edge of the field, a defined distance to the water must be maintained when fertilising according to the fertiliser regulations. For this purpose, the throwing distance is further reduced in combination with the shutter slide.



Grenzstreuen mit Grenzstreuschirm (1) Illu_Grenz-_Graben-_Rand-_Beetstreuen_001_d0_20150831
  1. Working width 2) Working width

Border spreading with the border spread deflector
If the first tramline is situated at the field’s edge, border spreading (environmentally orientated) is then achieved by utilising the half-side shut-off of the spread fan. No fertiliser goes beyond the boundary of the field, and optimum fertilisation takes place inside of the boundary.



Bed spreading via bed spreading deflector on both sides
AMAZONE offers the bed spreading deflector for spreading special crops in beds on the left and right of the tramline. It keeps the track virtually free from fertiliser. The bed spreading deflector is actuated manually or, as an option, hydraulically from the tractor cab.

Beetstreuen mit beidseitigem Beetstreuschirm (1) Beetstreuschirm_d0_cw_4876_d1_160512_CMS

Beetstreuen_001_d0_20150831_rdax_170x99.jpg
  1. Working width 2) Working width


More information + Less information -

Limiter V+ border spreading system

Electrically adjustable Limiter V+
The sensitive electrical adjustment of the Limiter V+ border spreading device to the respective field boundary enables comfortable switching between field-side, border and water course spreading from the tractor cab during fertiliser application. Due to the design of the Limiter V+ being open at the bottom, this can be swivelled down gradually from above into the spread fan diverting what is going towards the field’s border.

1. With just a slight lowering of the Limiter V+ only the fertiliser flow of the long vane is deflected.
2. If the Limiter V+ is lowered further, the fertiliser flow from both spreading vanes is deflected.
3. In the completely lowered position, lamella block provides an accurate spread pattern towards the field’s border.

More information + Less information -
ZA-V_3200_Detail_002_d1_160512_55proz_rdax_170x58.jpg

Side, border and water course spreading

For spreading adjacent to fields, roads or water courses, the ZA-V can also be equipped with the Limiter V+ border spreading device. The border spreading device can then be smoothly lowered into the fertiliser flow at differing heights. The swivelling adjustment around the centre of the spreading disc sets the Limiter V+ to the different working widths and fertiliser types. This ensures an accurate spread pattern at the border.


1. Normal spreading
2. Side spreading
3. Border and water course spreading

More information + Less information -

Limiter V border spreading system

Hydraulically-actuated Limiter V

The hydraulically actuated Limiter V border spreading system is available for side, border and water course spreading. Prior to spreading, the recommended working height of the Limiter V is fixed via a pin, depending on the border situation. Around the field’s edge, the Limiter V can then be hydraulically lowered to that pre-selected position and raised again in the field.

More information + Less information -

Border spread deflector

For the case of spreading directly from the field side into the inner field, the border spread deflector is available.  When the border spread deflector is swivelled down, spreading is carried out only with the field side spreading disc, so that any fertiliser is deflected in such a way that it is only thrown behind the tractor and into the field, but not beyond the border. The border spread deflector can be utilised on both the left and right hand side. The border spread deflector is actuated manually or, as an option, hydraulically from the tractor cab. When swivelled up, the border spread deflector has no influence on normal spreading.

More information + Less information -
Bewiesene Präzision! (3) ZA-V_2700_profis_tronic_MF_003_d1_230127_CMS

Proven precision! Innovation Farm border spreading field trial

Field trials prove the best border spreading results
The aim of the field trial was to demonstrate that border spreading systems and equipment not only offer ecological benefits but also have a great influence on the potential yield in the field boundary area. Precise technology is required to spread the full rate of fertiliser right up to the field boundary as well as to avoid any fertiliser losses outside the field boundary.

Bewiesene Präzision! (2) Tabelle
Additional revenue per hectare of cropped area and per year with the use of the different border spreading systems at a width of 18 m, in comparison to a reference point without a border spreading system. (top agrar 07/2022, Source: Innovation Farm) Calculation basis: CAN: 650.00 €/t ∅ Wheat yield: 7.8 t/ha Profit: 350.00 €/t

The Limiter provides a simple and precise introduction to border spreading systems. Especially with the Limiter V+ electric border spreading device, it is possible to harness the full potential of the field by responding to changing border situations from the tractor cab.


Key statements of the trial

  • “A wider working width or smaller field size increases the size of the return on a boundary spreading system.” 
  • “All border spreading systems can significantly reduce the amount of fertiliser thrown outside the boundary.” 
  • “With the ‘Lamella block’ and ‘Hydro’ systems, the percentage outside the field boundary is reduced to only 2.5 %.” 

(top agrar - “Precision goes boundary spreading" - 07/2022)


Bewiesene Präzision! (1) Feld_250pro_CMS
The diagram shows the border spreading operation, in which the aim was not to spread any fertiliser beyond the field boundary if possible.

More information + Less information -

Spread pattern simulator

The spread pattern simulator gives an intuitive introduction to how a fertiliser spreader works. Optimal settings for a variety of combinations of fertilisers and working widths can be clearly displayed and the influence that wind and fertiliser quality have also shown. Try it for yourself…

Precision in mineral fertiliser application

Amazone offers ever more efficient and precise machines and processes, so that the agricultural sector can retain its competitiveness and future viability and operate more sustainably at the same time.

We need your consent

This content is provided by an external server. By activating the content, personal data may be accessed and Cookies may be utilised.

SmartLearning - EasyCheck

Precise spreading made easy – a digital, mobile test kit for the easy optimisation of the lateral distribution. Instead of using the test trays, as with the normal mobile test kit, the EasyCheck system consists of just 16 lightweight rubber mats and the EasyCheck App for smartphones.